BLT Products

Five axis AC servo injection manipulator BRTR13WDS5PC, FC

Five axis servo manipulator BRTR13WDS5PC,FC

Short Description

Five-axis driver and controller integrated system: fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high accuracy of repeated positioning.


Main Specification
  • Recommended I.M.M (ton): 360T-700T
  • Vertical Stroke (mm): 1350
  • Traverse Stroke (mm): 1800
  • Max loading (kg): 10
  • Weight (kg): 450
  • Product Detail

    Product Tags

    Product Introduction

    BRTR13WDS5PC/FC applies to all types of horizontal injection machine ranges of 360T-700T for take-out products and runner. The vertical arm is the telescopic stage runner arm. Five-axis AC servo drive, also suitable for in-mold labeling and in-mold inserting application. After installing the manipulator, the productivity will be increased by 10-30% and will reduce the defective rate of products, ensure the safety of operators, reduce manpower and accurately control the output to reduce waste. Five-axis driver and controller integrated system: fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high accuracy of repeated positioning, can simultaneously control multiple axes, simple equipment maintenance, and low failure rate.

    Accurate Positioning

    Accurate Positioning

    Fast

    Fast

    Long Service Life

    Long Service Life

    Low Failure Rate

    Low Failure Rate

    Reduce labor

    Reduce Labor

    Telecommunication

    Telecommunication

    Basic Parameters

    Power Source (kVA)

    Recommended I.M.M (ton)

    Traverse Driven

    Model of EOAT

    3.72

    360T-700T

    AC Servo motor

    four suctions two fixtures

    Traverse Stroke (mm)

    Crosswise Stroke (mm)

    Vertical Stroke (mm)

    Max.loading (kg)

    1800

    P:800-R:800

    1350

    10

    Dry Take Out Time (sec)

    Dry Cycle Time (sec)

    Air Consumption (NI/cycle)

    Weight (kg)

    2.08

    7.8

    6.8

    450

    Model representation: W:Telescopic type D:Product arm +runner arm. S5:Five-axis driven by AC Servo Motor(Traverse-axis、Vertical-axis+Crosswise-axis).

    The above-mentioned cycle time are the results of our company’s internal test standard. In the actual application process of the machine, they will vary according to the actual operation.

    Trajectory Chart

    BRTR13WDS5PC infrastructure

    A

    B

    C

    D

    E

    F

    G

    1720

    2690

    1350

    435

    1800

    390

    198

    H

    I

    J

    K

    L

    M

    N

    245

    135

    510

    800

    1520

    430

    800

    No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.

    Applications

    1. Take-out products: the plastic injection moulding robot is primarily designed for the swift and precise extraction of finished products from the injection moulding machine. It handles a wide variety of products, including plastic components, containers, packaging materials, and other injection-molded items.
     
    2. Sprue removal: In addition to product extraction, the robot is also proficient in removing sprues, which are excess materials formed during the injection moulding process. The robot's dexterity and grip strength enable efficient removal of sprues, reducing waste and enhancing the overall quality of the final products.

    product application picture

    F&Q

    1. Is it simple to install and integrate the pickup injection manipulator with the current injection machines?
    - Yes, the manipulator is designed to be simple to install and integrate. It comes with thorough installation instructions, and our technical support staff is ready to help with any questions or problems you may be having with the integration.

    2. Is the manipulator capable of handling various product shapes and sizes?
    - Yes, as a result of the telescoping stage and flexible product arm, a variety of product sizes and forms may be handled. Simple adjustments can be made to the manipulator to meet unique needs.

    3. Does the manipulator need routine upkeep?
    - It is advised to do routine checks and lubricate moving components to guarantee their longevity and best performance.

    4. Is it safe to operate the manipulator near human operators?
    - In order to protect operators, the manipulator is outfitted with safety measures such emergency stop buttons and safety interlocks. It is made to adhere to the strictest safety requirements.

    Recommended Industries

    mold injection application
    • Injection Molding

      Injection Molding


  • Previous:
  • Next: